Ultrasyntec have completed the re-surfacing of a high specification outside car parking area which was also required as a bund area to contain contaminated water in the event of fire or chemical spillage etc. Surfachem is situated at the top of a steep hill, above Elland, this will prevent the contaminant running into the town as Surfachem have installed a large storage tank beneath the car park.
PREPARATION: The tarmac area was mechanically prepared using the vacuum (minimal dust) captive blastracking system.
FLOOR REPAIRS: These were undertaken using a two pack flexible floor repair filler.
FLOORING SPECIFICATION: The area was primed by roller application using a flexible damp course membrane primer and allowed to cure overnight.
We then applied the Resdek Chemically Resistant Hard Wearing Polyurethane Flooring System with steel trowels and allowed to cure overnight. This included the breeze block wall around the area to a height of 350mm to create the safety bund previously mentioned.
CAR PARKING SPACES & HATCHED AREA: Car parking spaces and a “No Parking” hatched area were installed using High Build Epoxy Line Marking material
Before and After