Ultrasyntec are currently working with Hoerbiger on the major refurbishment of all their factory floors. With well over 2000 Sq. Meters to lay and working around Hoerbigers’ busy shift schedules,’ this large project will be ongoing.
Preparation: Diamond grind the floor to remove oil and dirt until the surface is clean, dry and a suitable surface to recieve a primer.
Flooring Products: One coat of oil resistant primer, then left to cure overnight.
Trowell applied Polyurethane Screed @ 6mm followed by 1 coat of chemical resistant/UV Stable Top Seal, then left to cure for 48 hours.
Before and After