Underfloor Heating System (Liverpool)
When UltraSyntec is not installing resin systems, barring screed or digging out for drain installation, we’re often installing Underfloor Heating Systems (UFH) across the north of England.
This was another example of the Nu-Heat Lo-Pro Max system, which has an overall thickness of 22 mm when the liquid screed has been applied.
The Low-Pro Max is a good, cost-effective flooring fit out kit. In use, the system has excellent heating capabilities. When all pipework was fitted and connected to the various manifolds a 22 mm self-levelling screed was pumped over. This was cured enough to walk on the following day. This meant minimal downtime on a busy construction site.
The overall floor area was 245 metres square.